- NMNH Home ›
- Research & Collections ›
- Botany ›
- Research ›
- Biological Diversity of the Guiana Shield ›
Making a Plant Specimen Dryer
Provided by Carol Kelloff
Materials needed:
Angled slotted zinc can be purchased in any local hardware store. You will need at least 4 pieces of angled zinc 1-1/2" x 72".
16 - 1" bolts
16 - wing nuts
8" x 24" board
2 - 150 watt flood lamps
2 - lamp sockets
4 - wood screws
3 yards of canvas ca. 24" width or 1.5 yards of canvas if 48" in width
8 - 1" brass grommets
10 feet of 16/3 power cord with plug
| Cut zinc angles | Zinc angle ends | Lights for heat | Bolts |
| Assembled Frame | Frame with lights | Finishing |
[ TOP ]
